Data Recovery Software
 

Data Recovery Software

 
1800-102-5400 (Only for India)

 
Quick RecoveryTM: Data Recovery Software & File Repair Tools
Email Recovery

FAQs for RAID 0

Q: How can you recover the data from RAID 0 Data Recovery?

A: This software helps you to recover the deleted, lost or damaged data from the RAID server. You need to follow the following procedure as:

  • Click on “Select Image”
  • A dialog box will open in order to select the image. Select the file system and click on next
  • Select the destination folder from where you wish to save the recovered files (make sure do not recover the files on the same drive from which you want to recover the data).
  • Once the procedure is complete, you can access the recovered files from the destination folder that you have assigned to save your data.

Q: What do you understand by the concept "RAID 0" configuration?

  • A: The term "RAID" refers to a "Redundant Array of Inexpensive (or Independent) Disks". RAID 0 drive sets are also described as "striped without parity" and "non-redundant" volumes.
  • A RAID 0 (zero) volume sets as a group of hard disk drives that are combined and accessed together which is purely based on a pre-defined configuration that allows for "data striping" across multiple drives.

Q: What do you understand by "disk striping"?
A: Information written as evenly, or "striped", over at least 2 (if not more) disk drives within a disk striping (RAID 0) volume,

Q: For a RAID 0 volume, how many drives are required?
A: The number of drives used in the array can be an odd or even number.
In order to establish a RAID 0 volume, a minimum of at least 2 hard disk drives are required.

FAQs for RAID 5

Q: What do you understand by RAID5 Data Recovery?
  • A: "RAID 5" refers to a "Redundant Array of Inexpensive (or Independent) Disks" that have been established in a Level 5, or striped with parity, volume set.
  • RAID 5 volume is a combination of hard drives that are configured for data to be written across three (3) or more drives.


Q: Is the software is eligible to recover the data from a re-formatted RAID 5volume?
Yes, the software has the ability to recover the data in such condition.

  • Depending on how the drives were re-formatted that tends many times that the information is still recoverable.
  • A low-level format routine (as performed using the controller software) will overwrite every sector, and in the process destroys the original data.
  • A high-level re-format (using Windows, for example), will create what will appear to be a new "clean" volume - but the original data will still be on the disk in the "free and available" space.
Q: How can you recover the data from RAID5 Data Recovery?
A: This software helps you to recover the deleted, lost or damaged data from the RAID5 server.

You need to follow the following procedure as:

  • Click on “Select Image”
  • A dialog box will open in order to select the image.
  • Select the file system and click on next
  • Select the destination folder from where you wish to save the recovered files (make sure do not recover the files on the same drive from which you want to recover the data).
  • Once the procedure is complete, you can access the recovered files from the destination folder that you have assigned to save your data.
banner